Alarms without a reason
Wet-well, pump, blower, and quality alarms fire. Failure mode, parts, procedures, and the last job live in other systems.
Water and wastewater utilities
See the station. Send the crew. Keep the proof.
Utilities run SCADA, a CMMS, a lab, and a capital plan that do not share a record. TwinEdge finds extra kWh and overfeed, turns that into a reviewed job, and keeps the sample, the work, and the capital plan on the same evidence. A person still approves.
- One record. Treatment, collection, quality, and work sit on the same asset.
- See extra cost, then draft the job. A person still accepts or rejects.
- A person still signs. The work, the dose, the report, and the capital plan.
One view from source to customer01 / SYSTEM VIEW
01Source02Treat03Store04Distribute
START WITHPlant + utility measurements
TWINEDGE CONNECTSOne view from source to customer
MOVE FORWARD WITHOperating response + evidence
Problems TwinEdge solves
The problems this industry lives with.
TwinEdge does not replace SCADA, BMS, GIS, billing, or the CMMS you already trust. It connects the finding to the repair and the budget.
Calendar PMs on stations that fail at 2am
Pump and lift-station PMs ignore load and condition until an emergency callout appears.
Extra energy and chemical with no owner
kWh and dose rise while the plant still makes the same water. Nobody can prove why, or turn the waste into a reviewed repair.
Compliance evidence assembled late
Samples, exceedances, work, and approvals are hard to reconstruct before an audit or an incident review.
THE WORKFLOW
From a reading to a finished job.
TwinEdge reads the machine, explains extra cost, turns that into a work order, and uses the same record when you decide to repair or replace.
OS at the station
TwinEdge OS collects protocols, keeps local history, and stays up if the network drops.
Historian remembers
Ask what the station did so people can approve the next job with the record in hand.
See why it costs more
A working copy of the pump or process shows why a pump or a dose is wasting money, then TwinEdge drafts the work.
CMMS and Field close it
A reviewed work order, offline execution, photos, and closeout on the same asset.
Quality and capital
The sample, the result, and what to replace next year sit on the same evidence.
Less surprise downtime
Catch wear at the station so a night-shift failure becomes a planned Tuesday repair.
Lower energy and chemical cost
Find extra kWh and overfeed on the same record as the machine, then a person accepts or rejects the dose.
A report you can sign
The sample, the result, and the capital plan use the operating evidence , TwinEdge does not file the regulator package on its own.
BEFORE YOU START
A few useful answers.
Is TwinEdge a SCADA replacement for water utilities?
No. TwinEdge is an operating layer above SCADA, historians, GIS, LIMS, and CMMS. It connects those systems into twins, recommendations, work, and evidence.
Does TwinEdge file the DMR or CCR on its own?
No. TwinEdge keeps the sample, the result, and the report you can sign. A person still reviews and still files.
Does TwinEdge automatically change pump setpoints or chemical dose?
No by default. TwinEdge recommends. A person accepts or rejects. Setpoint or dose changes stay behind your existing controls unless a separately governed policy allows more.
THE NEXT CONNECTION
Explore the product familyBuild the rest of your loop.
START WITH YOUR OPERATION
Put the next decision in motion.
Discuss your sources, assets, and the outcomes your team wants to improve.