← Hardware Overview
Accessories
Protocol Adapters
Hardware adapters that bridge legacy and industrial protocols to your TwinEdge Hub. Connect Modbus RTU, BACnet MS/TP, EtherNet/IP, HART, and raw 4-20 mA analog signals through a unified interface.
Available Adapters
Modbus RTU Adapter
RS-485 (2-wire / 4-wire)
- Baud Rate1,200 - 115,200 bps
- Max Devices32 per bus
- Isolation2,500 Vrms galvanic, 15 kV ESD
BACnet MS/TP Adapter
RS-485 (EIA-485)
- Baud Rate9,600 - 76,800 bps
- Max Devices128 per segment
- ModesRouter, BBMD, Foreign Device
EtherNet/IP Adapter
RJ-45 Ethernet (100 Mbps)
- ProtocolCIP over TCP/UDP
- Max Connections64 simultaneous
- ConnectorM12 D-coded to RJ-45
HART Adapter
HART over 4-20 mA
- HART Version5, 6, 7
- Channels4 per adapter
- Loop PowerPassthrough, no disruption
4-20 mA ADC Module
8-channel analog input
- Input Range0-20 mA / 4-20 mA / 0-10 V
- Resolution16-bit (65,536 steps)
- Sampling Rate100 Hz per channel
Hub Compatibility
| Adapter | Hub Pro | Hub Industrial | Hub Rugged |
|---|---|---|---|
| Modbus RTU | |||
| BACnet MS/TP | |||
| EtherNet/IP | |||
| HART | -- | ||
| 4-20 mA ADC |
Connect Any Protocol
Bridge legacy devices to your digital twin platform with plug-and-play protocol adapters.